Grade 2 Titanium
Standard: ASTM B348 / B348M when specified · UNS R50400
Profile, dimensions, condition and availability: confirmed by quotation.
ASTM B348 Titanium Bar & Rod
Titanium Bar & Rod Manufacturer for Precision Machining
Source round bar, rod, precision-ground stock and custom profiles with material, dimensions, tolerance, finish, processing and inspection reviewed against your order requirements.
Buying Essentials
Freeze the Order Basis Before Comparing Price
Material
Grade, UNS, specification and revision, condition and supplementary requirements.
Profile & Size
Round diameter or section dimensions, length, quantity and machining allowance.
Precision Requirements
Tolerance, straightness, roundness, surface, roughness and end condition.
Evidence
MTC, traceability, inspection, testing, marking, packing and release records.
Grades & Supply Review
Titanium Bar & Rod Grades & Forms
Titanium Bar & Rod grades and product forms reviewed against ASTM / ASME / project specifications.
Grade 5 / Ti-6Al-4V
Standard: ASTM B348 or AMS 4928 as ordered · UNS R56400
Profile, dimensions, condition and availability: confirmed by quotation.
Grade 7 Titanium
Standard: ASTM B348 / B348M when specified · UNS R52400
Profile, dimensions, condition and availability: confirmed by quotation.
Grade 23 / Ti-6Al-4V ELI
Standard: ASTM B348 / B348M when specified · UNS R56407
Profile, dimensions, condition and availability: confirmed by quotation.
Process Review
Coordinate the Order from Specification to Release
Each step closes one part of the order basis. Titanium Bar & Rod preparation, processing and inspection scope are confirmed by quotation against the approved order basis.
01
Titanium Round Bar & Rod
State grade, diameter, condition, length, tolerance, straightness, finish and quantity.
02
Titanium Precision-Ground Bar
Add finished diameter, tolerance system, gauge length, straightness, roundness and surface requirement.
03
Titanium Hollow Bar
Define OD, ID, wall or machining allowance, length, concentricity needs and source-route acceptance.
04
Titanium Square & Rectangular Bar
State width, height, corner condition, length, squareness, straightness and machining allowance.
05
Titanium Hex Bar
Define across-flats dimension, length, tolerance, straightness, surface and intended machining route.
Inside Titanium Parts
Titanium Bar & Rod Manufacturing Environment
Titanium Bar & Rod preparation, processing and inspection are carried out in our own facility. The inspection scope and documentation for a specific order are agreed in the quotation.
Application Context
Match Material Decisions to the Actual Service
Grade, condition and documentation choices follow from the operating environment, not from the section name. Each context below sets the typical qualification conversation before the first quotation.
Titanium Forged & Custom Blank
Provide the approved drawing, material, condition, section, allowance, testing and acceptance plan.
CNC Machining & Precision Parts
Control diameter or section, straightness, allowance, surface and material condition against the actual machining route.
Chemical & Marine Equipment
Define media, concentration, contaminants, temperature, loading, joining and crevice conditions before grade selection.
Aerospace & High-Performance
Confirm approved specification, revision, condition, source and qualification responsibilities; general Grade 5 supply is not aerospace approval.
Supply Scope & Qualification
Specify the Evidence Needed for Acceptance
A certificate name alone does not define the complete acceptance package. State the traceability level, inspection characteristics, test reports, marking, third-party involvement and release documents required by the order.
Aerospace & High-Performance
Confirm approved specification, revision, condition, source and qualification responsibilities; general Grade 5 supply is not aerospace approval.
Medical & Customer-Qualified
Separate raw-material specification and traceability from finished-device validation, approval and regulatory responsibility.
Material identity
Grade, heat or lot, form, condition and certificate link.
Dimensional evidence
Diameter, length, tolerance, straightness, roundness and surface.
Before You Order
Confirm Four Controls Before You Buy
Four checks that catch most order-basis errors before they become commercial or quality problems.
Testing & NDT
Only the methods and criteria required by the agreed specification or order.
Document release
Index, report format, approval route and delivery timing.
Material Identity
Grade, profile, specification revision, condition and heat or lot basis.
Geometry & Processing
Size, tolerance, straightness, surface, allowance and processing boundary.
Questions
Titanium Bar & Rod FAQ
Common questions before sending the inquiry.
What information is needed for a titanium bar or rod quotation?
Provide the grade, governing specification and revision, condition, profile, diameter or section, length, quantity, surface, processing, inspection, testing and document requirements. A drawing is helpful for non-round or drawing-based blanks.
What is the difference between titanium rod and titanium bar?
The terms describe different production routes and dimensional practice. In general, rod covers smaller round cross-sections and bar covers larger rounds, squares, hex and rectangular sections. State the profile, dimensions and applicable specification.
Which grades can be reviewed for titanium bar and rod?
Common enquiries include Grades 2, 5, 7 and 23. Other grades may be reviewed. Availability, source form, condition, size and applicable specification are confirmed for the specific quotation.
Can precision-ground titanium bar be supplied?
Ground bar can be reviewed where diameter tolerance, straightness, roundness and surface requirements are defined. Achievable results depend on grade, starting diameter, finished size, length, quantity and process route.
Can hollow, square, rectangular or hex titanium bar be supplied?
Non-round and hollow profiles can be reviewed from the required section, grade, condition, length, tolerance, machining allowance and quantity. Supply may use a standard source form or a drawing-based route, as stated in the quotation.
Are MTC, NDT and third-party inspection included automatically?
No. Required certificates, traceability, dimensional records, testing, NDT and third-party involvement should be specified before quotation. Only the agreed package is included in the order scope.